{"product_id":"steamrc-bearing-adhesive-271-red","title":"SteamRC Bearing Adhesive 271 Red","description":"\u003cp\u003e\u003cstrong\u003eSTEAM 271 Red Anaerobic Bearing Adhesive is a high-strength retaining compound designed for securing bearings and other close-fitting metal components in RC helicopter assemblies.\u003c\/strong\u003e It cures between fitted metal surfaces in the absence of air, creating a strong bond that helps prevent bearings from rotating, shifting, or loosening under vibration and high-speed operation.\u003c\/p\u003e\n\u003ch3\u003eFeatures \u0026amp; Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength formula designed for demanding RC helicopter applications.\u003c\/li\u003e\n\u003cli\u003eHelps prevent bearings from rotating or moving inside bearing blocks and housings.\u003c\/li\u003e\n\u003cli\u003eSuitable for securing bearings in main rotor holders, main shaft housings, tail belt units, and swashplates.\u003c\/li\u003e\n\u003cli\u003eFills small gaps between closely fitted metal components.\u003c\/li\u003e\n\u003cli\u003eHelps reduce unwanted movement, vibration, and wear caused by loose-fitting bearings.\u003c\/li\u003e\n\u003cli\u003eAnaerobic formula cures when confined between fitted metal surfaces and isolated from air.\u003c\/li\u003e\n\u003cli\u003eProvides initial fixation in approximately 10 minutes.\u003c\/li\u003e\n\u003cli\u003eReaches maximum strength after approximately 24 hours.\u003c\/li\u003e\n\u003cli\u003eRed colour allows easy identification during assembly and maintenance.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRecommended Applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMain rotor holder bearings\u003c\/li\u003e\n\u003cli\u003eMain shaft housing bearings\u003c\/li\u003e\n\u003cli\u003eTail belt unit bearings\u003c\/li\u003e\n\u003cli\u003eSwashplate bearings\u003c\/li\u003e\n\u003cli\u003eBearing blocks and metal housings\u003c\/li\u003e\n\u003cli\u003eOther close-fitting cylindrical metal components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eUsage Instructions\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove the bearing or component and thoroughly clean both mating surfaces.\u003c\/li\u003e\n\u003cli\u003eRemove all oil, grease, dust, and old adhesive to achieve maximum bonding strength.\u003c\/li\u003e\n\u003cli\u003eEnsure both surfaces are clean and dry before application.\u003c\/li\u003e\n\u003cli\u003eApply a small amount of adhesive evenly around the outside of the bearing or inside the bearing seat.\u003c\/li\u003e\n\u003cli\u003eInstall the bearing immediately and position it correctly.\u003c\/li\u003e\n\u003cli\u003eWipe away excess adhesive before it cures.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 10 minutes for initial fixation.\u003c\/li\u003e\n\u003cli\u003eAllow approximately 24 hours for the adhesive to reach maximum strength before operating the helicopter.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e Apply sparingly and only to the outside of the bearing or the bearing seat. Do not allow adhesive to enter the bearing, as it may lock or damage the internal moving components. Due to its high holding strength, heat and suitable tools may be required for later removal.\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e STEAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct:\u003c\/strong\u003e Anaerobic Bearing Adhesive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct Number:\u003c\/strong\u003e K10291A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGrade:\u003c\/strong\u003e 271\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive Type:\u003c\/strong\u003e Anaerobic retaining compound\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStrength:\u003c\/strong\u003e High strength\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInitial Fixation Time:\u003c\/strong\u003e Approximately 10 minutes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure Time:\u003c\/strong\u003e Approximately 24 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e Bearings and close-fitting cylindrical metal components\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage:\u003c\/strong\u003e Store at normal room temperature with the container properly closed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Includes:\u003c\/strong\u003e 1 × STEAM 271 Red Anaerobic Adhesive\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SteamRC","offers":[{"title":"Default Title","offer_id":53379764617513,"sku":"K10291A","price":1.99,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0731\/0324\/5609\/files\/K10291A.webp?v=1785343535","url":"https:\/\/rotorquest.com\/fr\/products\/steamrc-bearing-adhesive-271-red","provider":"Rotorquest Inc.","version":"1.0","type":"link"}