
This is the Goosky Legend RS6 Ultra helicopter kit without blades. Choose this version if you already have a compatible blade set or want to pick your own. Main blades, tail blades and electronics are sold separately.
Prefer the kit with blades included? Shop the RS6 Ultra with main and tail blades.
The Goosky Legend RS6 Ultra is a 600-class electric flybarless helicopter you can build for 6S or 12S power. Its 1:1 rotor head gives a direct cyclic response, while the quick-release canopy makes it easy to reach your flight pack between flights. Goosky offers the Ultra in two canopy colours, Lime Green and Danxia Orange.

Original RS6 vs. RS6 Ultra — what’s new?
If you fly 3D, the standout upgrade is the raised tail rotor. It sits closer to the main rotor disk, helping reduce the tendency for the nose to rise or dip during pirouettes. Goosky also revised the carbon-fibre tail boom, reporting 30g less boom weight and 38% greater bending strength. Under the canopy, the Ultra moves from the original 107-tooth main gear to a reinforced 116-tooth gear. The battery bay is also 20mm longer and 10mm wider, giving you more room for longer or wider packs, although pack height clearance drops by 4 mm.

What you’ll need to complete the kit
- Blades: Goosky’s reference setup uses 600 mm main blades and 95 mm tail blades.
- Motor and ESC: A 4025–4230 size brushless helicopter motor and an ESC matched to your chosen 6S or 12S setup.
- Servos: Three full-size cyclic servos and one full-size tail servo.
- Flight control and radio: A flybarless controller, compatible transmitter and receiver or integrated receiver system.
- Battery and charger: A suitable flight pack and compatible LiPo charger.
Airframe and rotor head
Three-layer main frame
The three-layer frame stiffens the centre of the helicopter where the main shaft and drivetrain meet. This gives the rotor head a rigid base when you load and unload the disc through fast collective changes.

1:1 flybarless rotor head
The 1:1 cyclic linkage gives a direct mechanical response from the swashplate to the blade grips. It provides a predictable starting point for tuning cyclic feel through your flybarless controller.

Quick-fit blade grip spacers
The main grips use self-lubricating POM spacers. Their quick-fit design makes blade changes easier, especially if you remove your main blades for transport.

Drivetrain and tail control
Reinforced main gear
The 116-tooth main gear is 14 mm thick to handle torque under load. Goosky pairs it with a 13-tooth pinion for a standard main gear ratio of 8.92:1.

Automatic tail belt tensioner
A self-adjusting tensioner takes up slack to help keep the tail belt at a consistent tension in flight. At the other end of the boom, revised guides support the belt as it enters the tail case.

Carbon-fibre boom and raised tail
The revised carbon-fibre boom saves weight at the tail while resisting bending under load. The raised tail rotor brings its thrust line closer to the main rotor disc to help the helicopter hold its attitude through a pirouette.

Two-position tail pitch bellcrank
The tail pitch bellcrank offers two linkage positions, giving you a mechanical adjustment point when setting up tail response.

Canopy access and battery fit
The quick-release canopy lifts away for pack changes and gives you a clear view of the battery leads. If you’re transferring packs from an original RS6, check all three dimensions. The Ultra bay measures 300 × 62 × 56 mm compared with 280 × 52 × 60 mm on the RS6. Allow space for your leads and connector with the canopy fitted.

Goosky Legend RS6 Ultra specifications
| Kit version | Unassembled airframe kit without blades or electronics |
|---|---|
| Helicopter class | 600-class electric flybarless |
| Airframe length × width × height | 1,212 × 203 × 326 mm |
| Reference blade lengths | 600 mm main / 95 mm tail, sold separately |
| Main / tail rotor diameter | 1,352 mm / 260 mm with reference blades fitted |
| Equipped weight without flight battery | Approx. 2.88 kg |
| Standard gearing | 116T main gear / 13T pinion (8.92:1) |
| Tail drive | Belt drive with automatic tensioner |
| Battery bay length × width × height | 300 × 62 × 56 mm |
