
The Goosky DS50MG Mini Tail Servo – GT020070 is the genuine factory tail servo designed for the Goosky Legend RS4 and RS4 Venom helicopters.
Compact, lightweight and extremely fast, the DS50MG is specifically designed for helicopter tail control. Its 760µs narrow-band signal and high refresh-rate capability provide the fast response and precise tail control required for sport and aggressive 3D flying.
Features:
- Genuine Goosky replacement tail servo
- Designed for the Goosky RS4 and RS4 Venom
- 35mm mini-size servo
- Fast response optimized for helicopter tail control
- 760µs narrow-band neutral pulse
- Up to 560Hz working frequency
- 25T output spline
- Compact and lightweight design
Specifications:
| Model | DS50MG |
| Part Number | GT020070 |
| Servo Size | 35mm Mini |
| Operating Voltage | 6.0–7.4V |
| Speed @ 6.0V | 0.041 sec / 60° |
| Speed @ 7.4V | 0.037 sec / 60° |
| Torque @ 6.0V | 1.6 kg·cm |
| Torque @ 7.4V | 2.0 kg·cm |
| Neutral Pulse | 760µs |
| Working Frequency | 50–560Hz |
| Dimensions | 35 × 15 × 29.5mm |
| Weight | 43g |
| Output Spline | 25T / 5.9mm |
| Connector | JR |
Compatibility:
- Goosky Legend RS4
- Goosky RS4 Venom
Alternative Tail Servo Options:
If you are looking for an alternative or upgraded mini tail servo for your RS4 / RS4 Venom, you may also consider:
- KST X15-855X Mini Brushless Tail Servo
- THETA Sabre-T1 NFC HV Mini Brushless Tail Servo
- THETA THM982 HV Mini Brushless Tail Servo
Note: When using an alternative servo, please verify the mounting dimensions, servo horn setup and flybarless controller settings before installation. Tail servos using a 760µs center pulse must be configured correctly in the flybarless system.