
The Goosky Legend RS6 Ultra Helicopter Kit includes Azure 600 mm main blades and 95 mm tail blades. Both blade sets come in the box, so you can focus on choosing the electronics for your 6S or 12S build. Assembly is required. Electronics and flight batteries are sold separately.
Already have blades for your build? Browse our Goosky kits for the RS6 Ultra without blades.
The RS6 Ultra is a 600-class electric flybarless helicopter with a 1:1 rotor head for direct cyclic response and a raised tail rotor designed to help the heli hold its attitude through pirouettes. Choose from two canopy colours, Lime Green and Danxia Orange.

Original RS6 vs. RS6 Ultra — what’s new?
For 3D pilots, the standout change is the raised tail rotor. It sits closer to the main rotor disc to help reduce the tendency for the nose to rise or dip during pirouettes. Goosky also reports that the redesigned carbon-fibre boom is 30 g lighter with 38% greater bending strength. The original 107-tooth main gear gives way to a reinforced 116-tooth gear, and the Ultra’s battery bay is 20 mm longer and 10 mm wider for longer or wider packs. Height clearance is 4 mm lower, so check your pack dimensions if you’re moving batteries over from an RS6.

What’s included
- Goosky Legend RS6 Ultra unassembled airframe kit in your selected canopy colour
- One set of Azure 600 mm main rotor blades
- One set of 95 mm tail rotor blades
What you’ll need to complete the build
- Motor and ESC — A 4025–4230 size brushless helicopter motor and an ESC matched to your chosen 6S or 12S setup.
- Servos — Three full-size cyclic servos and one full-size tail servo.
- Flight control and radio — A flybarless controller, a compatible transmitter and a receiver. The receiver can be integrated into the controller.
- Battery and charger — A flight pack suited to your power system and a compatible LiPo charger.
Airframe and rotor head
Three-layer main frame
The three-layer frame stiffens the centre of the helicopter where the main shaft and drivetrain meet. This gives the rotor head a rigid base as you load and unload the disc through fast collective changes.

1:1 flybarless rotor head
The 1:1 cyclic linkage gives a direct mechanical response from the swashplate to the blade grips. It provides a predictable starting point for tuning cyclic feel through your flybarless controller.

Quick-fit blade grip spacers
The main grips use self-lubricating POM spacers. Their quick-fit design makes it easier to remove your Azure main blades for transport and refit them at the field.

Drivetrain and tail control
Reinforced main gear
The 116-tooth main gear is 14 mm thick to handle torque under load. Goosky pairs it with a 13-tooth pinion for a standard main gear ratio of 8.92:1.

Automatic tail belt tensioner
A self-adjusting tensioner takes up slack to help keep the tail belt at a consistent tension in flight. At the other end of the boom, revised guides support the belt as it enters the tail case.

Carbon-fibre boom and raised tail rotor
The revised carbon-fibre boom reduces weight at the tail while resisting bending under load. The raised tail assembly positions the 95 mm tail blades closer to the plane of the main rotor.


Two-position tail pitch bellcrank
The tail pitch bellcrank gives you two linkage mounting positions to choose from when setting up the mechanical response of the tail.

Canopy access and battery fit
The quick-release canopy lifts away for pack changes and gives you a clear view of the battery leads. The Ultra’s battery bay measures 300 × 62 × 56 mm, compared with 280 × 52 × 60 mm on the original RS6. When checking pack fit, allow room for the leads and connector under the canopy.


Goosky Legend RS6 Ultra specifications
| Kit version | Unassembled airframe kit with main and tail blades. Electronics sold separately. |
|---|---|
| Included main blades | Azure 600 mm |
| Included tail blades | 95 mm |
| Helicopter class | 600-class electric flybarless |
| Airframe dimensions (L × W × H) | 1,212 × 203 × 326 mm |
| Main / tail rotor diameter | 1,352 mm / 260 mm with 600 mm main and 95 mm tail blades fitted |
| Equipped weight without flight battery | Approx. 2.88 kg |
| Standard gearing | 116T main gear / 13T pinion (8.92:1) |
| Tail drive | Belt drive with automatic tensioner |
| Battery bay dimensions (L × W × H) | 300 × 62 × 56 mm |

