Charger Accessories

replacement 2-8s balance boards for hyperion batteries or any other battery that uses JST-EH balance connectors. Use a JST-XH balance cable to connect to your charger. -1pc per

replacement 10s balance cables (11 wire) for balance boards or parallel charging boards to connect to your charger (icharger 4010 or other suitable models). JST-XH balance connectors w/24awg silicon wires - 2pcs

replacement balance boards for the icharger 308 2-8s. does not come with cables, 2 boards only -compatible with any 2s-8s parallel charger that uses the jst-xh balance connectors

This simple adapter makes it easy to connect your battery to the X16 charger from ISDT. The open-style JST-XH connector means you can hook up any standard balance lead from 2S all the way up to 16S, then connect to the charger using the balance leads...

SKYRC BD250 Battery Discharger Analyzer, displays real-time battery voltage, discharged capacity, and discharge current. It can test battery capacity that helps select batteries with the desired capacity. It saves time when users wish to...

This 2-8s balance board allows you to easily connect your batteries to your iCharger 4010 (cable is 10s-8s to fit the 8s balance board). Charge individual 2-8s packs or it can also be used for parallel (parallel cable is required and sold separately) and...

This balance board allows you to easily connect your batteries to your iCharger Duo 308. Charge individual 2-8s packs or it can also be used for parallel (parallel charge board or cable is required) and series charging. Specifications Board Input...

Please note – Spektrum IC2 connectors and charge leads ARE NOT compatible with EC2 connectors

Please note – Spektrum IC2 connectors and charge leads ARE NOT compatible with EC2 connectors

Please note – Spektrum IC2 connectors and charge leads ARE NOT compatible with EC2 connectors

Power Supply Cable for ToolkitRc, iSDT, Ultrapower, GT Power, Hota or any charger with XT60 input. This cable has XT60 output and 4mm Bannana input to Power supply.

A Handy Multi-plug charging cable for ToolkitRc, iSDT, Ultrapower, GT Power, Hota or any charger with XT60 output.*Charger not included

A Handy Power Supply Cable for ToolkitRc, iSDT, Ultrapower, GT Power, Hota or any charger with XT60 input.*Charger and Power Supply not included.

XT60 to XT30 Adapter (1pc)

This cable allows connects the Icharger 406 to the balance board. Specifications: Input Connector: 6S JST-XHOutput Connector: 10S JST-XHWire Type: 20 AWG SiliconeLength: 6"

This charger makes field charging your model plane, drone, or quadcopter easy! Just take any 3s or 4s lipo with an XT60 connector and plug it in to this charger and charge dozens of 1s packs. You could also use a wall adapter (sold separately HERE) as...

4mm gold plated Male banana (bullet) connectors with 30cm 12 gauge wires.Included: (1) x black wire(1) x red wire

JST male connector to XT60 male W/10cm 20AWG silicone wire

JST male connector to Deans male plug W/10cm 20AWG silicone wire