A new revision to a popular fc model from Diatone. Now with larger solder pads for easier insatllation and setup.
MAMBA | Super Big Soldering Pad
MAMBA Basic F722 MK3 Flight Controller
Diagram Link From Help Centre Link
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection ?when Mamba Led sys avaiable?
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot?Most?
- Upgrade the anti-interference cable
- Use Typec?Most?
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
Specification:
MCU: 216MHz STM32F722RET6
IMU: MPU6000
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED? 4 Set 2812 LED?
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A (System Power))&
5V 3A(LED )& 9V 3A
MOUNTING: 30.5mm,M3